Uninterruptible Power Supplies Online UPS 1.5K User Manual

Rack/Tower Online UPS 1K/1.5K/2K/3K Uninterruptible Power Supply System User Manual

8 4-battery kit Step 1: Remove adhesive tapes. Step 2: Connect all battery terminals by following below chart. Step 3: Put assembled battery pa

9 3. Operations 3-1. Button operation Button View Button Function ON/Mute Button  Turn on the UPS: Press and hold ON/Mute button for at lea

10 Display Function Backup time information Indicates the backup time in pie chart. Indicates the backup time in numbers. H: hours, M: minute

11 3-3. Audible Alarm Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuous

12  01: Output voltage setting Interface Setting For 208/220/230/240 VAC models, you may choose the following output voltage: 208: presents output

13  05: AECO enable/disable Interface Setting ENA: Advanced ECO mode enable DIS: Advanced ECO mode disable  06: Bypass mode enable/disable Inter

14  09: LCD display direction setting Interface Setting RAC: the LCD display is horizontal. TOE: the LCD display is vertical.  10: Acceptable

15 AECO mode (Advanced Efficiency Corrective Optimizer) When the input voltage is within setting range (±3%Vo max), UPS will bypass voltage to outp

16 3-8. Warning indicator Warning Icon (flashing) Code Alarm Low Battery Sounding every second Overload Sounding twice every second Battery is n

17 4. Troubleshooting If the UPS system does not operate correctly, please solve the problem by using the table below. Symptom Possible cause Reme

Table of Contents 1. Important Safety Warning ... 1 1-1. Tr

18 Symptom Possible cause Remedy Fault code is shown as 14 and alarm is continuously sounding. The UPS shut down automatically because short circuit

19 5. Storage and Maintenance 5-1. Operation The UPS system contains no user-serviceable parts. If the battery service life (3~5 years at 25°C amb

20 MODEL 1K 1KL 1.5K 1.5KL 2K 2KL 3K 3KL Capacity VA 1000 VA 1000 VA 1500 VA 1500 VA 2000 VA 2000 VA 3000 VA 3000 VA W 900 W 800W 1350 W 1

1 1. Important Safety Warning Please comply with all warnings and operating instructions in this manual strictly. Save this manual properly and read

2 1-5. Maintenance, service and faults  The UPS system operates with hazardous voltages. Repairs may be carried out only by qualified maintenance p

3 2. Installation and setup NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. Please keep the

4 2-2. Install the UPS For safety consideration, the UPS is shipped out from factory without connecting battery wires. Before install the UPS, please

5 Step 3: Communication connection Communication port: USB port RS-232 port Intelligent slot To allo

6 2-4 Battery Replacement NOTICE: This UPS is equipped with internal batteries and user can replace the batteries without shutting down the UPS or co

7 2-5 Battery Kit Assembly (option) NOTICE: Please assemble battery kit first before installing it inside of UPS. Please select correct battery kit p