Uninterruptible Power Supplies Online UPS 2K User Manual download pdf (Page 18)

4. Panel Description

The Display Panel

Switch Function

ON-Button

Turn on UPS system: By pressing the ON-Button “I” the UPS

system is turned on.

Deactivate acoustic alarm: By pressing this Button an acoustic

alarm can be deactivated in the battery mode. By short touch this

Button all acoustic alarms can be deactivated in all mode.

Do the battery test: By pressing this Button the UPS can do the

battery test in the Line mode or ECO mode or Converter mode.

OFF-Button

When mains power is normal, the UPS system switches to No

output or Bypass mode by pressing OFF-Button “ “, and the

inverter is off. At this moment, if Bypass is enabled, then the

output sockets are supplied with voltage via the bypass if the

mains power is available.

Deactivate acoustic alarm: By pressing this Button an acoustic

alarm can be deactivated in the bypass mode.

Release the UPS from fault mode and EPO status.

Select-Button The output voltage, frequency, Bypass disable/enable and

operating mode in No output or Bypass mode, Two Load

segments in output mode, The number of EBM in all mode, could

be selected by pressing Select-Button, and confirmed by

pressing Enter-Button.

Enter-Button

LCD Screen

ON Button/

Alarm Silence

OFF-Button Select-Button Enter-Button

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 40 41

No comments

Uninterruptible Power Supplies Online UPS 2K User Manual Page 18