Uninterruptible Power Supplies Online UPS 3K User Manual download pdf (Page 21)

UPS724-01-00 PowerWave 1000 (1-3kVA) User Manual - Dated 26 June 2013 3-1

Installation and Set-up

3.1 Unpacking the UPS equipment

The manufacturer has designed robust packaging for your product to help ensure it reaches you in good

order; however, accidents and damage may sometimes occur during shipment. You should inspect the UPS

carefully upon receipt and if there are signs of damage you must inform the carrier and dealer immediately.

The packaging is recyclable; save it for re-use or dispose of it appropriately and correctly.

1. Remove the UPS from the packing carton.

2. Check the package contents. The standard unit includes:

a) User Manual.

b) Two IEC output cables.

c) An AC power cord terminated with a mains plug suitable for the country of use.

d) A set of UPS communication software complete with RS232 cable.

e) A mounting accessories kit which allows the UPS/Battery cabinets to be configured for Tower or

Rack installation.

3. Before proceeding, check the data plate on the rear of the UPS and verify that the unit’s voltage and

power ratings comply with the equipment order details, and contact the dealer if this is incorrect.

3.2 Selecting a suitable installation location

As the UPS weighs several kilograms, the location where the UPS is to be installed must meet be able to

safely support its weight.

To ensure correct operation and a long service life, always install the UPS in accordance with the following

environmental conditions:

• The UPS is not designed for outdoor use.

• The installed location must be dry and free of excessive dust.

• The UPS must not be installed in a corrosive environment or in the vicinity of flammable items.

• The ambient temperature and humidity must be within the limits specified in chapter 8 of this manual.

• The ventilation grills at the front of the UPS and extractor fans at the rear of the UPS must not be

obstructed.

• The UPS equipment must be installed with the clearances illustrated in Figure 3.1 as a minimum.

CAUTION: Read the safety information contained in chapter 1 before installing the UPS.

WARNING: Under no circumstances should you connect electrical power to a damaged unit or

attempt to start it using its internal batteries.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

No comments

Uninterruptible Power Supplies Online UPS 3K User Manual Page 21