Uninterruptible Power Supplies Online UPS 3K User Manual download pdf (Page 25)

UPS724-01-00 PowerWave 1000 (1-3kVA) User Manual - Dated 26 June 2013 3-5

3: Installation and Set-up

10. Repeat the previous 2 steps to fit the new top panel to the battery cabinet.

11. Connect the interconnecting battery cable (supplied) between the UPS and battery enclosure. Note that

you may have to remove the safety cover on the back of each unit to gain access to the battery

connector.

12. This completes the tower+battery hardware configuration. The UPS should now be commissioned as

detailed in paragraph 3.5.1 before it is put into service.

3.4 Rack configuration set-up

Figure 3.5 UPS Rack mounting kit

The PowerWave 1000 UPS and battery enclosure(s) can be installed in a standard 19 inch rack, and can be

either shelf mounted or installed on adjustable mounting rails that are provided as part of the rack installation

kit. If the batteries are housed in a separate enclosure, it should be mounted on an adjacent shelf in the same

rack using same procedure as mounting the UPS. The two enclosures are then later connected together

using the supplied interconnecting cable.

Figure 3.6 Rack mounting options

B1 1 x Adjustable mounting rail (Left)

B2 1 x Adjustable mounting rail (Right)

B3 2 x Adapter plate

B4 2 x Rack mounting handle

B5 12 x Captive nuts

B6 8 x Dome head bolts

B7 4 x Countersunk bolts

B4B3 B5

Shelf mounting

Adjustable mounting rails

FRONT

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

No comments

Uninterruptible Power Supplies Online UPS 3K User Manual Page 25